NB: journal entry for the Jewellery and Small object module at South bank Griffith university (QCA) to view the full journal click here
The following is a record of the cutting of the panels are for the cross guard (final project)
 |
| Brass is a harder metal, previously ive cut aluminium at home but my saw does not take the JC blades, so this had to be done in studio time |
 |
| The curved sections had to be cut first, and due to depth the cuts had to be made from two directions as the saw's depth was too shallow. |
 |
| all curves have been cut |
 |
| the seperation of the two halves was made using the cutting maching |
 |
| ABOVE: Cutting machine |
 |
| The center curves were then cut out |
No comments:
Post a Comment